Please wait while the page loads...

Check Engine Light Service Ram 5500

What do you do when you’re driving along in your Ram 5500 and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ram owners, your heart sinks a miniature because you have miniature idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your Ram 5500 checked as soon as viable. Ignoring that warning could end up causing colossal damage to expensive engine components.

When your Ram 5500's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t favorable, a computer turns on your check engine light. This amber or yellow light is continuously labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is designate with an electrical scan tool that is used by our Ram auto repair mechanics at Mike Shaw Chrysler Dodge Jeep Ram. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to designate the issue and repair it.

Will the check engine light reset itself?

The check engine light on your Ram 5500 will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going correct, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your Ram 5500 light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Mike Shaw Chrysler Dodge Jeep Ram so the light and code can be double-checked and reset.

Ram 5500 Check Engine Light Flashing

Although there are frequent attainable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are frequent known causes including something as plain as a loose gas cap. Alternative known reasons for a Check Engine Light are faulty head gasket, damaged oxygen sensor, a malfunction with the fuel injection system, faulty emissions control part, dirty mass airflow sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Ram Certified Technicians and the certified service protocol to isolate the root problem and repair it as imperative to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ram issue was fixed.

Every Ram 5500 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its mandatory systems. The sensors are continuously detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light brightens telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Mike Shaw Chrysler Dodge Jeep Ram provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Exceedingly Qualified Service professional.

What Does the Check Engine Light Mean?

One of the most consistently misunderstood lights or indicators in your Ram 5500 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few disparate ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light brightens in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your Ram 5500. Some of these include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name a lot. With that being said, the check engine light can express a collection of various things. It can be as detectable as your gas cap being loose or as active as engine knocking. If your check engine light is on in your Ram 5500, contact Mike Shaw Chrysler Dodge Jeep Ram. Contact Mike Shaw Chrysler Dodge Jeep Ram today! Our Ram service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is blinking.

What could cause the check engine light to come on in a Ram 5500?

When your check engine light comes on, this could be as authentic as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a rigid problem that could cause rigid damage to your engine and come with a considerable repair bill. Depending on your make and model, the check engine light will illuminate or blink. A consistent glow commonly means something less rigid but a blinking check engine light illustrates that your vehicle’s engine is in rigid trouble and service is fundamental at this moment. If your check engine light is blinking in your Ram 5500, we exceedingly recommend not to drive the vehicle and schedule Ram service today. Below is a list of the most usual reasons your check engine light can come on:

  • Your Ram 5500 has a vacuum leak. Every Ram 5500 has a vacuum system that performs a roomy mixture of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, chiefly if they’re exposed to exciting heat or extreme distraught.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your Ram 5500 if it’s not installed properly. These aftermarket parts and accessories can dump the battery, trigger the check engine light, or even prevent the automobile from starting. If these issues sound present, bring your 5500 to Ram and have our unit of certified mechanics ensure that your aftermarket items were installed properly and aren't causing any issue. Getting accessories, chiefly aftermarket parts and accessories, or using OEM parts original place might cost some bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • One of the most common and frequent cause is that your Ram 5500 gas cap is loose, damaged or missing. The gas cap for your Ram 5500 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is departed or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't pricey. If your check engine light turns on immediately after you put gas in your Ram 5500, original thing you should check is to make bold the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your Ram 5500’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Mike Shaw Chrysler Dodge Jeep Ram offers a complimentary multi-point inspection with every Ram service. If you have an issue with your catalytic converter and don't get it serviced, your Ram 5500 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause other problems from overheating.
  • The battery is low or dead. The battery in your Ram 5500 is every critical. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did several decades ago, and they don't really require maintenance. The price of a new one depends on the type of Ram you drive, but check our current service coupons and specials.
  • New Spark Plugs or Plug Wires are imperative for your Ram 5500. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your automobile. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or departed, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, large to more pricey repairs.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Ram 5500 is what determines how much fuel is imperative to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to conclusive changes, like altitude. If your Ram 5500 is having trouble starting, idling rough or has a immediate change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, accepted as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your automobile will be less realistic when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your Ram 5500's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to imply the noble mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.

Ram 5500 Check Engine Light

A flashing light expresses that the problem is perilous and if not taken care of shortly may result in major damage to the vehicle. If the check engine light in your Ram 5500 starts flashing, that means that the problem needs immediate attention and your Ram should be brought in shortly. This blinking light typically indicates a stern engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can expeditiously raise the temperature of the catalytic converter to a point where damage is potential, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can definitely be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive advisors at Mike Shaw Chrysler Dodge Jeep Ram instantly by calling 9702364701. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very lavish repair.

Is it safe to drive your Ram 5500 with the check engine light on?

If the check engine light is flashing, this means that there is a harsh issue and it is recommended to service your Ram 5500 quickly. This question is not extraordinarily common because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is mostly indicated by a dependable glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more strict problem. Call the experts at Mike Shaw Chrysler Dodge Jeep Ram by dialing 9702364701 so you can describe the issues. Or decrease your speed and bring your Ram to our certified mechanics as soon as achievable.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not accurately tightened to a more strict failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it satisfying to get the legal code reading and diagnosis. The average price for a check engine light diagnosis & testing is commonly between $88 and $111. The satisfying news, Mike Shaw Chrysler Dodge Jeep Ram offers complimentary multi-point inspections and free diagnostics, in most cases, to aid pick the cause of your check engine light.

Ram 5500 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear decent away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your 5500. There are hundreds of different codes that your check engine light can mean. While that sounds daunting, with a few patience, tackling imperative diagnostics will give you helpful knowledge about your vehicle and will also allow that Check Engine Light to do what it is truly supposed to do: be your guide. Unfortunately, different and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of feasible OBD codes, there are also hundreds of feasible reasons for the light, including:

  • Computer output circuit issues
  • O2 Sensor
  • Fuel and air metering systems problems
  • Loose Gas Cap or Missing Gas Cap
  • Transmission issues
  • Emissions controls issues
  • Old Battery
  • Bad Spark Plugs
  • Ignition system faults

This is why it is main for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out promptly by a certified Ram mechanic. If the engine light comes on due to a unhealthy concern, you risk harmful your car further by not repairing the issue polite away. Call Mike Shaw Chrysler Dodge Jeep Ram at 9702364701 straightaway or schedule your check engine light service online today!

How many miles can you drive with the check engine light?

It could be anything from a bad sensor to plug wires needing to be replaced. If you check engine light is flashing, we advocate that you pull over and contact Mike Shaw Chrysler Dodge Jeep Ram to assist mean if your vehicle is safe to drive in or if we advocate a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is not effortless to predict how countless miles you can drive with the warning light on.