Please wait while the page loads...

2019 Ram 4500 Check Engine Light Flashing

Although there are countless likely causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several daily causes including something as straightforward as a loose gas cap. Further daily reasons for a Check Engine Light are a malfunction with the fuel injection system, dirty mass airflow sensor, damaged oxygen sensor, faulty head gasket, faulty emissions control part, or defective spark plugs to name countless. No matter what is the root cause of the Check Engine Light, we have the Ram Certified Mechanics and the certified service protocol to isolate the root problem and repair it as mandatory to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ram issue was fixed.

Every 2019 Ram 4500 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its important systems. The sensors are normally detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Mike Shaw Chrysler Dodge Jeep Ram provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extraordinarily Qualified Service professional.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not accurately tightened to a more hazardous failure like a harmful catalytic converter or a problem with one of the car's oxygen sensors, so it exceptional to get the good code reading and diagnosis. The intermediate cost for a check engine light diagnosis & testing is commonly between $88 and $111. The exceptional news, Mike Shaw Chrysler Dodge Jeep Ram offers complimentary multi-point inspections and free diagnostics, in most cases, to help suggest the cause of your check engine light.

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is difficult to predict how many miles you can commute with the warning light on. If you check engine light is twinkling, we advise that you pull over and contact Mike Shaw Chrysler Dodge Jeep Ram to help choice if your vehicle is consistent to commute in or if we advise a tow truck. The safest bet is to decipher the code and then plan your strategy subsequently. It could be anything from a damaging sensor to plug wires needing to be replaced.

2019 Ram 4500 Check Engine Light

If the check engine light in your 2019 Ram 4500 starts shining, that means that the problem needs fast attention and your Ram should be brought in suddenly. A shining light hints that the problem is harsh and if not taken care of suddenly may result in major wear and tear to the car. This blinking light ordinarily indicates a severe engine misfire allowing unburned fuel to be discarded into the exhaust system. There it can expeditiously raise the temperature of the catalytic converter to a point where damage is probable, requiring an expensive repair. A Few owners ask if spark plugs cause the check engine light to flash? This can really be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If your check engine light is blinking, please contact our team of automotive experts at Mike Shaw Chrysler Dodge Jeep Ram shortly by calling 9702364701. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair.

Check Engine Light Service 2019 Ram 4500

What do you do when you’re driving along in your Ram 4500 and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ram owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2019 Ram 4500 checked as soon as achievable. Ignoring that warning could end up causing gigantic wear and tear to expensive engine parts.

When your 2019 Ram 4500's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the mechanical control system that it can’t pragmatic, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is select with an electronic inspect tool that is used by our Ram auto repair mechanics at Mike Shaw Chrysler Dodge Jeep Ram. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you designate that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an skilled licensed to illustrate the issue and repair it.

Will the check engine light reset itself?

The check engine light on your 2019 Ram 4500 will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2019 Ram 4500 light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Mike Shaw Chrysler Dodge Jeep Ram so the light and code can be double-checked and reset.

What could cause the check engine light to come on in a 2019 Ram 4500?

When your check engine light comes on, this could be as cooperative as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a critical problem that could cause critical damage to your engine and come with a exquisite repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow consistently means something less critical but a flashing check engine light indicates that your vehicle’s engine is in critical trouble and service is needed immediately. If your check engine light is flashing in your 2019 Ram 4500, we especially recommend not to commute the vehicle and schedule Ram service today. Below is a list of the most prevalent reasons your check engine light can come on:

  • New Spark Plugs or Plug Wires are mandatory for your 2019 Ram 4500. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or historic, you will experience poor performance and reduced power. In a bit extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, primary to more costly repairs.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your 2019 Ram 4500 if it’s not installed properly. These aftermarket components and accessories can discard the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound receptive, bring your 4500 to Ram and have our squad of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, highly aftermarket parts and accessories, or using OEM components earliest place might price a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • The battery is low or dead. The battery in your 2019 Ram 4500 is every gargantuan. Without a vehicle battery, your vehicle won’t start, light up the road ahead, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did a little decades ago, and they don't really require maintenance. The price of a new one depends on the type of Ram you drive, but check our ongoing service coupons and specials.
  • Your O2 Sensor (Oxygen Sensor) needs to be interchanged. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less functional when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2019 Ram 4500's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the proper mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a vehicle to fail an emissions test.
  • Your 2019 Ram 4500 has a vacuum leak. Every Ram 4500 has a vacuum system that performs a expanded variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, highly if they’re exposed to important heat or extreme afraid.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2019 Ram 4500’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Mike Shaw Chrysler Dodge Jeep Ram offers a complimentary multi-point inspection with every Ram service. If you have an issue with your catalytic converter and don't get it repaired, your 2019 Ram 4500 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause other problems from overheating.
  • One of the most natural and frequent cause is that your 2019 Ram 4500 gas cap is loose, damaged or missing. The gas cap for your 2019 Ram 4500 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is historic or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't costly. If your check engine light turns on abruptly after you put gas in your 2019 Ram 4500, earliest thing you should check is to make satisfied the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your mass airflow sensor (known as MAF) needs to be interchanged. The mass airflow sensor in your Ram 4500 is what determines how much fuel is mandatory to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to existing changes, like altitude. If your Ram 4500 is having trouble starting, idling rough or has a speedy change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.

What Does the Check Engine Light Mean?

One of the most consistently misunderstood lights or indicators in your 2019 Ram 4500 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a bit assorted ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2019 Ram 4500. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name a bit. With that being said, the check engine light can advocate a variety of assorted things. It can be as simple as your gas cap being loose or as serious as engine knocking. If your check engine light is on in your 2019 Ram 4500, contact Mike Shaw Chrysler Dodge Jeep Ram. Our Ram service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Mike Shaw Chrysler Dodge Jeep Ram today!

2019 Ram 4500 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard immediately illuminates, but in reality, it is not something that should cause you to shut down in fear polite away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your 4500. There are hundreds of different codes that your check engine light can represent. While that sounds daunting, with some patience, tackling large diagnostics will give you essential knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, discrete and ready for use vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of careful OBD codes, there are also hundreds of careful reasons for the light, including:

  • Ignition system faults
  • Loose Gas Cap or Missing Gas Cap
  • O2 Sensor
  • Transmission issues
  • Fuel and air metering systems problems
  • Bad Spark Plugs
  • Emissions controls issues
  • Old Battery
  • Computer output circuit issues

This is why it is vital for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a aggressive concern, you risk damaging your car further by not repairing the issue prudent away. When your check engine light comes on, you should get it checked out rapidly by a certified Ram mechanic. Call Mike Shaw Chrysler Dodge Jeep Ram at 9702364701 today or schedule your check engine light service online today!

Is it safe to drive your 2019 Ram 4500 with the check engine light on?

This question is not especially authentic because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be dependable to drive. This is normally indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more diversified problem. If the check engine light is glaring, this means that there is a diversified issue and it is recommended to service your Ram 4500 instantly. Call the experts at Mike Shaw Chrysler Dodge Jeep Ram by dialing 9702364701 so you can describe the issues. Or reduce your speed and bring your 2019 Ram to our certified mechanics as soon as achievable.