Please wait while the page loads...

Is it safe to drive your 2014 Ram 4500 with the check engine light on?

This question is not very simple because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is consistently indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more critical problem. If the check engine light is flashing, this means that there is a critical issue and it is recommended to service your Ram 4500 quickly. Call the experts at Mike Shaw Chrysler Dodge Jeep Ram by dialing 9702364701 so you can describe the issues. Or cut down your speed and deliver your 2014 Ram to our certified mechanics as soon as practical.

How much does it cost to get the engine light checked?

The intermediate cost for a check engine light diagnosis & testing is generally between $88 and $111. The satisfactory news, Mike Shaw Chrysler Dodge Jeep Ram offers complimentary multi-point inspections and free diagnostics, in most cases, to help embrace the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not accordingly tightened to a more important failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it satisfactory to get the appropriate code reading and diagnosis.

2014 Ram 4500 Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are some ordinary causes including something as common as a loose gas cap. Assorted ordinary reasons for a Check Engine Light are a malfunction with the fuel injection system, faulty head gasket, damaged oxygen sensor, faulty emissions control part, dirty mass airflow sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Ram Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ram issue was fixed.

Every 2014 Ram 4500 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its gargantuan systems. The sensors are commonly detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Mike Shaw Chrysler Dodge Jeep Ram provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Hugely Qualified Service professional.

2014 Ram 4500 Check Engine Light

A flashing light indicates that the problem is threatening and if not taken care of urgently may result in major break to the vehicle. If the check engine light in your 2014 Ram 4500 starts flashing, that means that the problem needs sudden attention and your Ram should be brought in urgently. This flashing light constantly implies a relentless engine misfire allowing unburned fuel to be ejected into the exhaust system. There it can instantly raise the temperature of the catalytic converter to a point where wear and tear is likely, requiring an pricey repair. A Few owners ask if spark plugs cause the check engine light to flash? This can actually be the cause. A bad, classic or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our unit of automotive experts at Mike Shaw Chrysler Dodge Jeep Ram instantly by calling 9702364701. If the problem is ignored or you continue to commute, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very fancy repair.

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. If you check engine light is flashing, we recommend that you pull over and contact Mike Shaw Chrysler Dodge Jeep Ram to assist elect for if your car is safe to drive in or if we recommend a tow truck. Since each check engine code has its own level of severity, it is principal to predict how many miles you can drive with the warning light on. It could be anything from a bad sensor to plug wires needing to be interchanged.

2014 Ram 4500 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear polite away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your 4500. There are hundreds of disparate codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling central diagnostics will give you easy knowledge about your car and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, pronounced and marvelous car symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of capacity OBD codes, there are also hundreds of capacity reasons for the light, including:

  • Fuel and air metering systems problems
  • Emissions controls issues
  • Loose Gas Cap or Missing Gas Cap
  • Computer output circuit issues
  • Old Battery
  • O2 Sensor
  • Ignition system faults
  • Transmission issues
  • Bad Spark Plugs

This is why it is certain for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a precarious concern, you risk harmful your car further by not repairing the issue right away. When your check engine light comes on, you should get it checked out rapidly by a certified Ram mechanic. Call Mike Shaw Chrysler Dodge Jeep Ram at 9702364701 hastily or schedule your check engine light service online today!

Check Engine Light Service 2014 Ram 4500

What do you do when you’re driving along in your Ram 4500 and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ram owners, your heart sinks a small because you have small idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t hint you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2014 Ram 4500 checked as soon as accessible. Ignoring that warning could end up causing major break to expensive engine components.

When your 2014 Ram 4500's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electrical control system that it can’t polite, a computer turns on your check engine light. This amber or yellow light is normally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic observe tool that is used by our Ram auto repair technicians at Mike Shaw Chrysler Dodge Jeep Ram. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an skilled licensed to mean the issue and repair it.

What Does the Check Engine Light Mean?

One of the most consistently misunderstood lights or indicators in your 2014 Ram 4500 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a bit contrasting ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2014 Ram 4500. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name several. With that being said, the check engine light can mean a mixture of assorted things. It can be as satisfactory as your gas cap being loose or as critical as engine knocking. If your check engine light is on in your 2014 Ram 4500, contact Mike Shaw Chrysler Dodge Jeep Ram. Contact Mike Shaw Chrysler Dodge Jeep Ram today! Our Ram service department can help you find out what code is turning your check engine light on or inspect why your check engine light is flashing.

What could cause the check engine light to come on in a 2014 Ram 4500?

When your check engine light comes on, this could be as understandable as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a impressive problem that could cause impressive damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A persistent glow typically means something less impressive but a shining check engine light suggests that your vehicle’s engine is in impressive trouble and service is decisive suddenly. If your check engine light is shining in your 2014 Ram 4500, we remarkably recommend not to travel to work the vehicle and schedule Ram service today. Below is a list of the most impressive reasons your check engine light can come on:

  • New Spark Plugs or Plug Wires are fundamental for your 2014 Ram 4500. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or classic, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, large to more expensive repairs.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your 2014 Ram 4500 if it’s not installed accordingly. These aftermarket elements and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound common, bring your 4500 to Ram and have our squad of certified mechanics ensure that your aftermarket items were installed perfectly and aren't causing any issue. Getting accessories, immensely aftermarket parts and accessories, or using OEM elements first place might estimate a microscopic bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your O2 Sensor (Oxygen Sensor) needs to be changed. The Oxygen sensor, known as the O2 sensor, measures the jettison of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less accurate when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2014 Ram 4500's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to represent the humane mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Your 2014 Ram 4500 has a vacuum leak. Every Ram 4500 has a vacuum system that performs a giant alter of functions. The vacuum system also helps lower detrimental emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, immensely if they’re exposed to dramatic heat or extreme amiable.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2014 Ram 4500’s exhaust system. The catalytic converter's work is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is frequently caused by neglected maintenance, which is why Mike Shaw Chrysler Dodge Jeep Ram offers a complimentary multi-point inspection with every Ram service. If you have an issue with your catalytic converter and don't get it fixed, your 2014 Ram 4500 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause other problems from overheating.
  • The battery is low or dead. The battery in your 2014 Ram 4500 is every exciting. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did assorted decades ago, and they don't really require maintenance. The price of a new one depends on the type of Ram you drive, but check our current service coupons and specials.
  • One of the most commonplace and bountiful cause is that your 2014 Ram 4500 gas cap is loose, damaged or missing. The gas cap for your 2014 Ram 4500 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is classic or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on instantly after you put gas in your 2014 Ram 4500, first thing you should check is to make courageous the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your mass airflow sensor (known as MAF) needs to be changed. The mass airflow sensor in your Ram 4500 is what determines how much fuel is fundamental to run your engine efficiently by measuring the jettison of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to confident changes, like altitude. If your Ram 4500 is having trouble starting, idling rough or has a quick change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.

Will the check engine light reset itself?

The check engine light on your 2014 Ram 4500 will usually shut itself off if the issue or code that caused it to turn on is serviced. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going factual, and you did a few of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2014 Ram 4500 light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to deliver it in to Mike Shaw Chrysler Dodge Jeep Ram so the light and code can be double-checked and reset.